Shematic

Well it has been a while and real life keeps interfering . . . the garage room has now mostly been renovated though (hangups for hanging hammock chairs were the biggest headache . . . BTW attics are HOT when the sun is out), the chicken run is done . . . although every once in a while one still escapes . . . and the whine rack, cookbook thing for a friend is done so I hope I have some time to finish this thing ... ... ... finally ...

So here is the prototype proposed schematic . . . the original had 2 tone pots but after a close examination it turned out that BOTH were set up as masters . . . and then there was the 4 way lever switch that did not quite work out . . . I'll have to revisit that one as it SHOULD be possible . . .

The pickup switches and phase switch will go into the upper cavity . . . the pots 'down below' and the rotary either in the lower front or maybe in the back as well . . . .

In the final version the double caps for the tone along with the switch may disappear and the duplicated treble bleed circuit almost certainly will . . . just want it in there for an A / B comparison for now . . . although, these are on/off/on switches . . . .  I may retain an on/off switch at least for both as well and/or a wide open switch bypassing both volume and tone pots altogether.

I'll cut some acrylic this weekend and fit the switches and start soldering . . . . . . good times . . . . .